95 Deg C 250V 5A KSD9700 Bimetal Thermal Protector for Electric Tools
Quick Detail:
| Model | K9700 |
| Reset Type | Auto Reset |
| | Single Pole,Single Throw(SPST) |
| Case Material: | Plastic or Metal |
| Rated Voltage & Current | 250V AC 5A/10A |
| Contact Type | Normally Closed(Open on Rise) or Normally Open(Close on Rise) |
| Operating Temperature Range | 45～150℃ |
| Temperature tolerance | ±5.0℃ |
| Contact Resistance | ≤50mΩ |
| Insulation Resistance | ≥100MΩ |
| Dielectric Strength | ≥1500V |
| Life Cycle | 10,000 Cycles |
| Certificate | CQC,TUV,UL,VDE,ROHS,REACH |
Description:
Model KSD9700Bimetal Thermal Protector is composed of high sensitive disk-shaped bimetallic element,moveable contact,static contact plate, fixed baseplate, moveable spring plate, case and temperature resistance lead wire.The bimetallic strip is fixed on the baseplate, which can maintain the consistency of disconnection and reset temperature after long-term use. Its main working principle is to control the temperature by opening or closing the bi-metal strip. It stays at normally closed/normally open status, it opens/closes when temeprature rising and closes/opens when temperature decreasing.It protects the device overheating and burning out. At normal temperature, the moveable contact and the static contact are in the closed state, the circuit is on.When the use of electrical failure, the temperature rise to the rated disconnect temperature value of the product, the bimetal element heat produced internal stress rapid action, it push the contact and cut off the power supply, then the electrical appliances stop working, so as to play a protective role.When the temperature of the protected appliance drops to the safe temperature, switch on the power again and the appliance resumes working.
Specifications:
1. Dimensional Outline
2. Structural Drawing
| Plastic Case Type | Metal Case Type |
| 
1. Lead wire
2. Epoxy Resin 3. Stationary Contact Plate
4. Movable Contact 5. Movable Spring Plate
6. Bimetallic Strip 7. Plastic Case 8. Insulation Block 9. Baseplate | 
1. Lead 2.Epoxy Resin 3. Stationary Contact Plate 4. Movable Contact 5. Movable Spring Plate 6. Bimetallic Strip 7. Metal Case 8. Insulation Block 9. Baseplate 10. Insulating Tube |
| 
Normally Open
| 
Normally Open
|
3. Action Temperature Table
| KSD9700 |
| Action Temperature | Reset Temperature | Action Temperature | Reset Temperature |
| 40±5℃ | ≥27℃ | 110±5℃ | 73±15℃ |
| 45±5℃ | ≥27℃ | 110±5℃ | 73±15℃ |
| 50±5℃ | ≥30℃ | 115±5℃ | 76±15℃ |
| 55±5℃ | ≥30℃ | 120±5℃ | 80±15℃ |
| 60±5℃ | 40±15℃ | 125±5℃ | 83±15℃ |
| 65±5℃ | 43±15℃ | 130±5℃ | 86±15℃ |
| 70±5℃ | 46±15℃ | 135±5℃ | 90±15℃ |
| 75±5℃ | 50±15℃ | 140±5℃ | 93±15℃ |
| 80±5℃ | 53±15℃ | 145±5℃ | 96±15℃ |
| 85±5℃ | 56±15℃ | 150±5℃ | 100±15℃ |
| 90±5℃ | 60±15℃ | | |
| 95±5℃ | 63±15℃ | | |
| 100±5℃ | 67±15℃ | | |
| 105±5℃ | 70±15℃ | | |
| Remark : |
| Reset Temperature: 2/3 of Action Temperature, tolerance is±15℃ or customized. |
Applications:
electric motor, transformer, recahrgeable battery, fan motor, conditioner motor, washing machine motor,
electric blanket, water pump motor, clothes dryer motor, transformer, ballast, power tools, microwave motor,
lampblack motor, rechargeable battery, liminator, heating pad, automatic fire-extinguishing System,
cooling system, electric tools, etc.
Competitive Advantage:
1. Small size and expedient installation
2. High temeprature resistance
3. Safe and reliable
4. High sensitivity
5. Low contact resistance
5. Long life cycles
6. ROHS compliant
7. Wide application
8. There are two types of normally closed and normally open can meet customers' different requirements
8. Anti-vacuum dipping process, can be dipped with the motor
9. The length and specifications of lead wire can be customized
Tag:
Bimetal Thermal Protector Switch, Motor Protector, Thermal Cut-out, Overload Protector, Overheat Protector,
Temperature Switch,Temperature Cutoff Switch, Thermal Cutout Switch, Temperature Controller,
Product Tags:
|
|
Electric Tools Use Bimetal Thermal Protector High Temperature Resistance Images
|
